Traslate WWN number to hpux 11.23 devices

[Isaac_4]

Hi:

My hpux box have 2 HBA/FC (HP AD299A), my O.S. see 4 disk for each lun that´s ok ( for redundancy).

My storage is a EVA4100

But I need to know how traslate the wwn to device hpux device name
World Wide LUN Name:
6005-08b4-0006-c190-0002-d000-0053-0000 (take from command view).

o how can traslate de hw path
(0/4/0/0/0/0.1.1.0.0.0.1 sdisk CLAIMED DEVICE HP HSV200 /dev/dsk/c2t0d1 /dev/rdsk/c2t0d1)
---> to a Virtual Disk that correspond in the command view.

Please help me!!!!!!!!!.

[P Muralidhar Kini]

Hi Isaac,

>> how can traslate de hw path
Refer the following link that talks about mapping the hardware path -
http://docs.hp.com/en/AB378-96002/ch01s10.html
This talks about how to map the hardware path to Bus/Target/Lun and so on.

Hope this helps.

Regards,
Murali

[Isaac_4]

Thks ... I read this but in my eva cant see LUN number only see the wwn , the Lun ID is set in 0 in all cases.

Some other idea !

Pls

[singh sanjeev]

what is OS of your HPUX...

if 11.31 then you can use scsimgr to view the detail of lun which correspond to WWN for LUN

[VK2COT]

Hello,

Simplest way: obtain evainfo tool from HP.
If you have maintenance contract, you can
get it.

Or, if you have PA-RISC servers, here is the
URL:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=471497&prodNameId=3439048&swEnvOID=2080&swLang=13&mode=2&taskId=135&swItem=co-56396-1

Cheers,

VK2COT

[Torsten.]

0/4/0/0/0/0.1.1.0.0.0.1

This is LUN1; you see this in command view in presentation screen too.

However, evainfo is the best in this case.