Operating System - HP-UX
1747980 Members
4708 Online
108756 Solutions
New Discussion

When i try commands on Single user mode the following ERROR Found.:-

 
SOLVED
Go to solution
aamir4u
Regular Advisor

When i try commands on Single user mode the following ERROR Found.:-

Hi,

 

When i try commands on Single user mode the following ERROR Found.:-

 

#

# fsck -F vxfs -o full /dev/ORAVG01/c01

vxfs fsck: V-3-20003: Cannot open /dev/ORAVG01/c01: No such device or address file system check failure, aborting ...

# fsck -F vxfs -o full,nolog /dev/ORAVG01/c01 vxfs fsck: V-3-20003: Cannot open /dev/ORAVG01/c01: No such device or address file system check failure, aborting ... 

# fsck -F vxfs -o full -y /dev/ORAVG01/c01 vxfs fsck: V-3-20003: Cannot open /dev/ORAVG01/c01: No such device or address file system check failure, aborting ...

 

My /c01 is a mirror LV.How can mount file system properly without user data loss.

 

Please help me as soon as possible..........

 

Thanks

Thanks
aamir uddin
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: When i try commands on Single user mode the following ERROR Found.:-

You first need to activate the VG - do you try to fsck a RAW file system? This will not work!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
basant
Frequent Advisor

Re: When i try commands on Single user mode the following ERROR Found.:-

run #fsck
without ant argument
after that # mount /usr
Basant Sharma
aamir4u
Regular Advisor

Re: When i try commands on Single user mode the following ERROR Found.:-

Thanks

 

I want also cluster ip not pinging eachother

my host entry is proper but we cant ping

 

Please help me.....

Thanks
aamir uddin
Torsten.
Acclaimed Contributor

Re: When i try commands on Single user mode the following ERROR Found.:-

In single user mode the network is down! You need to go to init 2 or better 3.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!