Operating System - HP-UX
1748150 Members
3570 Online
108758 Solutions
New Discussion юеВ

Re: X-server can not be started

 
Yaroki
Super Advisor

Re: X-server can not be started

Hello,

 

Does anyone have an idea???

 

BR,

 

Yali

Matti_Kurkela
Honored Contributor

Re: X-server can not be started

The warning messages of dr_dt should have been displayed on the same terminal/console you used to run the command. However, they might have scrolled off too fast.

 

So, run dr_dt again, directing its output to a file this time:

dr_dt >/tmp/dr_dt.out

 Once it completes, you can view the output with:

more /tmp/dr_dt.out

 (When viewing the file with "more", use the space key or Enter to move forwards in the file, or the "b" key to move backwards. Return to the command prompt with the "q" key.)

 

The warnings may include multiple lines. Each warning will have "WARNING:" at the beginning of its first line.

MK
Yaroki
Super Advisor

Re: X-server can not be started

Hi Matti,

 

I run it and these are the results:

 

1. the file /var/adm/inetd.sec is not exsit. I could not find it on other B. 11.11 OS but only on B.10.20

OS.

 

2. the directory / is not properly configured. The current configuration is:

Permissions = drwxr-xr-x

owner = root

group = root

For HP CDE to function correctly, it should be a directory with the following configuration:

 

Permissions = dr-xr-xr-x

owner = root

group = sys

 

3. Same as the above for /etc/hosts permissions. (but it doen't say that it concern to the CDE).

 

 In addition I attached the screen results (as a screen shot).

 

BR,

Yali

Yaroki
Super Advisor

Re: X-server can not be started

Dear all,

 

Please let me know if there is a solution to this problem.

BR,

 

Yali

Yaroki
Super Advisor

Re: X-server can not be started

Hello,

 

Still, the problem exist.

I want to add 2 more issues that my concern the problem:

 

1. demsg command shows lost of messages of the following:

 

WARNING: modpath: DLKM is not initialized

WARNING: modpath: DLKM is not initialized

WARNING: modpath: DLKM is not initialized

.

.

.

WARNING: modld: Attempt to load module gvid_info: DLKM is not initialized

.

.

WARNING: modadm: DLKM is not initialized

 

 

2. Front LED panel is blinking Orange and rear LED panel status is as follow:

Video Warning -  - No video adapter present. Install a video adapter. See installation instructions shipped with the video adapter

 

Please let me know if the above indications can help?

BR,

Yali

 

Torsten.
Acclaimed Contributor

Re: X-server can not be started

No video card present?

This could be a good reason.


I assume this is a C8000 workstation.


Look at the rear side if you can see a VGA connector.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Yaroki
Super Advisor

Re: X-server can not be started

Indeed, it is a C800 workstation.

I can see the VGA connector there.

Torsten.
Acclaimed Contributor

Re: X-server can not be started

So let us see an

# ioscan -fn

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Yaroki
Super Advisor

Re: X-server can not be started

Please find the attache file for ioscan -fn

Torsten.
Acclaimed Contributor

Re: X-server can not be started

This might help:

http://h30499.www3.hp.com/t5/General/Xserver-does-not-start-C8000-11-i/m-p/5002726/highlight/true#M165373


But it could be a problem with the graphics hardware.



Can you attach

/tmp/dr_dt.out


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!