Showing results for 
Search instead for 
Do you mean 

disk initialization

SOLVED
Go to Solution
Highlighted
Super Advisor

disk initialization

[ Edited ]

Hi there

I have an N class server with 11i version of HPUX.

One of the disks faild so I've replaced it with new one.

ioscan -fnCdisk says:

Disk 3 0/5/0/0.8.0.255.0.0.0 sdisk NO_HW DEVICE SEAGATE ST39102FC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0

I was trying insf -e, but it didnt help.
I was trying other disks, and sytuation is the same.

I dont want to reboot the system.

Is there any other way to make system notice the disk is there ?


P.S. This thread has been moevd from Disk to HP-UX > sysadmin. - hp forum moderator

Jesus is the King
2 REPLIES
Acclaimed Contributor Acclaimed Contributor

Re: disk initialization

Hi,

see my post in this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1046729

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Acclaimed Contributor Acclaimed Contributor

Re: disk initialization

and here too:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1067729

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!