HPE Community
Operating System - HP-UX
1752557 Members
4144 Online
108788 Solutions
New Discussion юеВ

disk initialization

 
SOLVED
Go to solution
Piotr Kirklewski
Super Advisor

тАО02-22-2007 01:54 AM - last edited on тАО03-16-2014 08:24 PM by

тАО02-22-2007 01:54 AM - last edited on тАО03-16-2014 08:24 PM by

disk initialization

Hi there

I have an N class server with 11i version of HPUX.

One of the disks faild so I've replaced it with new one.

ioscan -fnCdisk says:

Disk 3 0/5/0/0.8.0.255.0.0.0 sdisk NO_HW DEVICE SEAGATE ST39102FC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0

I was trying insf -e, but it didnt help.
I was trying other disks, and sytuation is the same.

I dont want to reboot the system.

Is there any other way to make system notice the disk is there ?


P.S. This thread has been moevd from Disk to HP-UX > sysadmin. - hp forum moderator

Jesus is the King
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО02-22-2007 02:28 AM

тАО02-22-2007 02:28 AM

Solution

Re: disk initialization

Hi,

see my post in this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1046729

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Torsten.
Acclaimed Contributor

тАО02-22-2007 02:30 AM

тАО02-22-2007 02:30 AM

Re: disk initialization

and here too:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1067729

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.