howto populate HPSP ( EFI service partition )

[ogin]

Hi!

during mirroring vg00 to a new disk i noticed that original HPSP is empty:

some_srv:/ # efi_ls -d /dev/rdisk/disk9_p3
FileName                             Last Modified             Size
total space 418598912 bytes, free space 418578432 bytes

Can one pls advise the source to populate both original vg00 disk's and its new mirror's - HPSP - with minimal required set of tools.

i found 1 article "HP Integrity Servers - HP-UX: How to Install Offline Diagnostics Environment (ODE) to HPSP.." but probably ODE is not the 'standard' set of tools to be stored at this partition.

Model is 'ia64 hp server BL870'.

Thanks,

--

pavel

[Torsten. · Accepted solution]

Sure you need it?

Usually not.

Get the latest Diagnostics IPF1203 from here

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3676869&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D54%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

It's outdated, new components are provided as separated downloads.

[ogin]

Hi Torsten,
Thanks for the URL!
i believe that IPF ODE could be needed, as it is a boot disk.

New problem occured:
# efi_ls -d /dev/rdisk/disk20_p3
efi_ls: invalid efi device
# efi_ls -d /dev/disk/disk20_p3
efi_ls: invalid efi device

while partition 3 exists:

# idisk /dev/rdisk/disk20
[cut..]
Primary Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = ae0a2ad6-8905-11e3-8000-d6217b60e588
Starting Lba Lo = 0x40
Starting Lba Hi = 0x0
Ending Lba Lo = 0xf9fff
Ending Lba Hi = 0x0
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000
Unique Partition GUID = ae0a2ae0-8905-11e3-8000-d6217b60e588
Starting Lba Lo = 0xfa000
Starting Lba Hi = 0x0
Ending Lba Lo = 0x10ef7fff
Ending Lba Hi = 0x0
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000
Unique Partition GUID = ae0a2aea-8905-11e3-8000-d6217b60e588
Starting Lba Lo = 0x10ef8000
Starting Lba Hi = 0x0
Ending Lba Lo = 0x10fbffbf
Ending Lba Hi = 0x0

How to make it work (HPSP partition) and what device to use with efi_cp: raw or block?

Thanks,
--
pavel

[Torsten.]

You can boot the image (I gave you the link) and install it from the menu there.

It is enough to have the CD (without installing), you can use it directly from CD.

It contains some (meanwhile outdated) firmware.

So you don't really need this installed.

[ogin]

i just did not plan to reboot the working server.
Ok, thanks again, Torsten