HPE Community
Operating System - HP-UX
1752310 Members
6126 Online
108786 Solutions
New Discussion юеВ

Re: lan interface stops responding

 
SOLVED
Go to solution
Dennis Handly
Acclaimed Contributor

тАО06-11-2014 12:00 AM

тАО06-11-2014 12:00 AM

Re: lan interface stops responding

>you need to make sure REMOTE MODE is enabled on the console.

 

Yes, Nelson provided that in post 3 and the "*" is there.

Reply
Nelson Chamba
Regular Advisor

тАО06-11-2014 07:14 AM

тАО06-11-2014 07:14 AM

Re: lan interface stops responding

Hi Patrick, thanks i was using the M cable of 3 pins and the console was connected to the UPS cable. Now i have console and ISL prompt. Now need to boot the OS.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО06-11-2014 07:58 AM

тАО06-11-2014 07:58 AM

Re: lan interface stops responding

Boot the system now.
If you see errors during boot, check the rc.log file.
Once the system is up, do a "lanscan".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.