powermt fail

[Ludovic Derlyn]

Hi,

i have a RX7640 11iV2 connected to cx3000
When i reboot any vpar, powermt display dev=all give errors

Half paths are dead, to recover, i execute this steps :

mv /etc/powermt.custom /etc/powermt.custom.old
ioscan -fnC disk
insf -eC disk
powermt config
powermt display dev=all
powermt save

try to reboot, powermt is corrupted

I have upgraded fiber channel, old version are not supported on my vpar

powerpath is in relase 5.1SP2 it's ok.

have you ani idea ?
Policy must be modified on powerpath ?

for informations , result of powermt display dev=all when it's ok

powermt display dev=all
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900844A92731F61E011 [(car) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.5 c14t0d5 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.5 c15t0d5 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.5 c16t0d5 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.5 c17t0d5 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900BCF4D57A1F61E011 [(car) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.6 c14t0d6 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.6 c15t0d6 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.6 c16t0d6 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.6 c17t0d6 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190024E23EBEE32DDF11 [(car) RACR_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.3 c14t0d3 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.3 c15t0d3 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.3 c16t0d3 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.3 c17t0d3 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119002EA238C6E02DDF11 [(car) RACR_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.1 c14t0d1 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.1 c15t0d1 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.1 c16t0d1 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.1 c17t0d1 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF11900320DB46EE42DDF11 [(car) RACR_Voting_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.0 c14t0d0 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.0 c15t0d0 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.0 c16t0d0 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.0 c17t0d0 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190046AD1702E42DDF11 [(car) RACR_OCR_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.4 RACR_OCR_A SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.4 c15t0d4 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.4 c16t0d4 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.4 c17t0d4 SP B0 active alive 0 0

CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119007497079FE42DDF11 [(car) RACR_Voting_C]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.2 c14t0d2 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.2 c15t0d2 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.2 c16t0d2 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.2 c17t0d2 SP B0 active alive 0 0

CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A008498999F2561E011 [(jdf) RACR_Voting_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.1 c10t0d1 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.1 c11t0d1 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.1 c12t0d1 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.1 c13t0d1 SP B0 active alive 0 0

CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00CE6C4FB22561E011 [(jdf) RACR_OCR_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.0 c10t0d0 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.0 c11t0d0 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.0 c12t0d0 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.0 c13t0d0 SP B0 active alive 0 0

CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00D605A97B2561E011 [(jdf) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.2 c10t0d2 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.2 c11t0d2 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.2 c12t0d2 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.2 c13t0d2 SP B0 active alive 0 0

CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00E2037F822561E011 [(jdf) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.3 c10t0d3 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.3 c11t0d3 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.3 c12t0d3 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.3 c13t0d3 SP B0 active alive 0 0

[Ludovic Derlyn]

others informations

powermt display options

Default storage system class: all
Show CLARiiON LUN names: true

Path Latency Monitor: Off

Path Latency Threshold: 0 Sec.

Storage
System Class Attributes
------------ ----------

Symmetrix periodic autorestore = on
status = managed

CLARiiON periodic autorestore = on
status = managed

Hitachi periodic autorestore = on
status = managed

Invista periodic autorestore = on
status = managed

HP xp periodic autorestore = on
status = managed

Ess periodic autorestore = on
status = managed

HP HSx periodic autorestore = on
status = managed



powermt display hba_mode
Symmetrix logical device count=0
CLARiiON logical device count=11
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters --------- ------ I/O Paths ----- Stats
### HW Path Summary Total Dead Q-IOs Mode
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0 optimal 4 0 0 Enabled
11 1/0/8/1/0/4/0.1.4.0.0 optimal 4 0 0 Enabled
12 1/0/10/1/0/4/0.2.0.0.0 optimal 4 0 0 Enabled
13 1/0/10/1/0/4/0.2.4.0.0 optimal 4 0 0 Enabled
14 1/0/8/1/0/4/0.3.0.0.0 optimal 7 0 0 Enabled
15 1/0/8/1/0/4/0.3.4.0.0 optimal 7 0 0 Enabled
16 1/0/10/1/0/4/0.4.0.0.0 optimal 7 0 0 Enabled
17 1/0/10/1/0/4/0.4.4.0.0 optimal 7 0 0 Enabled