System Administration
Showing results for 
Search instead for 
Do you mean 

setup SNMP parametr service of HP_UX for monitoring tools ?

Occasional Contributor

setup SNMP parametr service of HP_UX for monitoring tools ?

how can setup SNMP Service hp-ux for Monitor cpu , memory , Partition Details of the Device and other objects with monitoring tools similar (OpManager) ?

my hp-ux snmpd.conf setting is (get-community-name: public )
do you config any Things ?
3 REPLIES
Regular Advisor

Re: setup SNMP parametr service of HP_UX for monitoring tools ?

Hi Abbas
Are u in iran???
You need more Software installed to monitor CPU , ...
Honored Contributor Honored Contributor

Re: setup SNMP parametr service of HP_UX for monitoring tools ?

Hi,

There is not much docs. available snmp configuration from scratch as far as I know.

I believe most useful/popular part of SNMP Trap to receive logs, and it totaly depends on your system ,and you have to decide which way you go if you use native HP-UX resources OR third party Software OR via HP SIM . .
-OS version ?
-Do you have HP SIM ?

the following links maybe useful for you:

https://h20375.www2.hp.com/portal/site/smartportal/menuitem.47c1218974f7b0f4d35d712b86daa8f0/

Also this is good doc:
http://docs.hp.com/en/418810-005/ch07s02.html

Highlighted
Honored Contributor Honored Contributor

Re: setup SNMP parametr service of HP_UX for monitoring tools ?

HI

>>get-community-name: public<<
This is the SNMP community name, most of the security people will ask to change it from public to some other name as per your needs.

For example:

http://www13.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00996781-4
Support Fatherhood - Stop Family Law