Operating System - HP-UX
1748146 Members
3632 Online
108758 Solutions
New Discussion юеВ

which bootpath is the "active" bootpath?

 
SOLVED
Go to solution
Tim Killinger
Regular Advisor

which bootpath is the "active" bootpath?

on an hpux 11.11 box with a mirrored system disk set, how do I tell which boot path the box is currently booted from? setboot tells me which path is primary and which is alternate, but how do I know for sure which path it was last booted from?

Primary bootpath : 0/1/1/0.0.0
Alternate bootpath : 0/1/1/0.1.0

Autoboot is ON (enabled)
Autosearch is ON (enabled)
5 REPLIES 5
Michal Kapalka (mikap)
Honored Contributor

Re: which bootpath is the "active" bootpath?

hi,

echo 'boot_string/s' | adb /stand/vmunix /dev/mem


mikap
Tim Killinger
Regular Advisor

Re: which bootpath is the "active" bootpath?

echo 'boot_string/s'|adb /stand/vmunix/dev/mem
cannot open `/stand/vmunix/dev/mem'
symbol not found
Michal Kapalka (mikap)
Honored Contributor
Solution

Re: which bootpath is the "active" bootpath?

hi,


/stand/vmunix/dev/mem

/stand/vmunix /dev/mem

it must be space between.

wrong formated from forum.

mikap
Hakki Aydin Ucar
Honored Contributor

Re: which bootpath is the "active" bootpath?

Did you try to issue command:
lvlnboot -v
Tim Killinger
Regular Advisor

Re: which bootpath is the "active" bootpath?

echo 'boot_string/s' | adb /stand/vmunix /dev/mem
boot_string:
boot_string: disk(0/1/1/0.0.0.0.0.0.0;0)/stand/vmunix

I thought I had last booted manually of path
0/1/1/0.1.0, but if this is correct, I guess I did not.


icgscnv1:/etc # setboot
Primary bootpath : 0/1/1/0.0.0
Alternate bootpath : 0/1/1/0.1.0

Autoboot is ON (enabled)
Autosearch is ON (enabled)