System Management
Showing results for 
Search instead for 
Do you mean 

Integrity BL860c I2 monitoring P410i

Occasional Advisor

Integrity BL860c I2 monitoring P410i



I'm building the above box with an embedded P410i talking to a D2200sb storage blade. Array controller is in RAID mode.


All is working nicely, System Management Homepage, WBEM, SNMP etc. However, when I simulate a drive failure in the D2200sb by pulling a drive the controller will correctly start rebuilding on the hot spare, MSA$UTIL shows the rebuild and that a drive's been pulled..... but nothing tells the management utilities and VMS doesn't log any errors. When the rebuild completes I replace the pulled drive and the controller rebuilds onto that, returning the hot spare.


Anyone know what actually logs these errors?





Trusted Contributor Trusted Contributor

Re: Integrity BL860c I2 monitoring P410i

Do you have WEBES or SMH installed?


Check both of these and see if it is there or in the errlog file.