System Management
Showing results for 
Search instead for 
Do you mean 

Type 111 errors in LOGTOOL - anything to be concerned about ?

Occasional Contributor

Type 111 errors in LOGTOOL - anything to be concerned about ?

Hi all,

 

I have noticed some TYPE 111 error in LOGTOOL on my 957SX running MPE/iX 6.5 server and wanted to understand whether these are anything to be concerned about as we will be physically relocating the server in 4 weeks time to a new data centre.

 

The reason i ask and for spotting this is that i have 2 systems for which the Full system on my 60GB server takes 4.5 hrs, but the server with only 40GB takes 7.5hrs with a physically LESS number of files too !!!

 

So, i have been looking for potential hardware issues that may be the culprit.

 

Here is a sample (and the complete list of TYPE 111's are attached for others enjoyment !) :

 

===============================================================================
SUN, JUL 1, 2012 1:03 PM LOG8168.PUB.SYS SYSTEM (PIN 261)
I/O ERROR
PRODUCT NAME: PDEV: 62
LDEV: DEVICE CLASS: 15
I/O EVENT CLASS: Software LLIO STATUS: $0000006F

MPE/XL I/O Status: Proc. Num. = 0, Error Num. = 0, Subsystem = 111

RETRY SCHEME: Summarized Retries WILL RETRY: NO
I/O RESULT: I/O Failed RUN AUTODIAG: NO
RETRY COUNT: 0 MGR PORT NUM.: $0
TRANS. NUM.: $0 # HDWR BYTES: 0
HARDWARE STATUS:

No hardware status was logged.

DATA LEN: 32 MGR CODE: 111
HLIO PROCEDURE: enable_term_signal_cLDEV NUMBER: 79
MPE XL STATUS: $FFCC0071 PROC DEPEND. PARM4: $94
PROC DEPEND. PARM5: $0 PROC DEPEND. PARM6: $0
PROC DEPEND. PARM7: $0 PROC DEPEND. PARM8: $1
===============================================================================

 

or............

 

===============================================================================
MON, JUL 2, 2012 7:54 AM LOG8169.PUB.SYS SYSTEM (PIN 261)
I/O ERROR
PRODUCT NAME: HPC1537A PDEV: 52.0.0
LDEV: 7 DEVICE CLASS: 15
I/O EVENT CLASS: Other LLIO STATUS: Successful
RETRY SCHEME: Summarized Retries WILL RETRY: NO
I/O RESULT: I/O Successful RUN AUTODIAG: NO
RETRY COUNT: 0 MGR PORT NUM.: $FFFFFF76
TRANS. NUM.: $114F649 # HDWR BYTES: 0
HARDWARE STATUS:

No hardware status was logged.

DATA LEN: 12 MGR CODE: 243
RECORD TYPE: LOG SENSE CURR GRPS WRITTEN: 282
CURR RAW RETRIES: 5 CURR GRPS READ: 2
CURR ECC3 RETRIES: 0 CLEAN ME: DEVICE IS CLEAN
===============================================================================

 

Can anyone out there offer any direction or advice please ?

 

Thanks in advance.

 

Sean