StoreEver Tape Storage
1748136 Members
3530 Online
108758 Solutions
New Discussion

HP STORAGEWORKS 1/8 G2 TAPE AUTOLOADER

 
JohnRambo
Occasional Visitor

HP STORAGEWORKS 1/8 G2 TAPE AUTOLOADER

SUCH HELLO.
HAVE A BACKUP DEVICE HP StorageWorks 1/8 G2 AUTOMATIC TAPE autoloader, AND DESIRE WITH manage SYMANTEC BACKUP EXEC SOFTWARE 2012, CONNECT TO A WINDOWS SERVER 2008 R2 THROUGH iSCSI PCI EXPRESS CARD, AND DOES NOT RECOGNIZE ME DEVICE.
Can you help you set up and DETECT THE SERVER?

 

P.S. This thread has been moved from Automated Backup to Tape Libraries and Drives. -HP Forum Moderator

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HP STORAGEWORKS 1/8 G2 TAPE AUTOLOADER

The autoloader has either SAS or FC interface, but not iSCSI. The ethernet port is for management only, not for data transfer.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JohnRambo
Occasional Visitor

Re: HP STORAGEWORKS 1/8 G2 TAPE AUTOLOADER

THEN HOW CAN I CONNECT THE DEVICE TO THE SERVER AND RECOGNIZED ME THE BACKUP EXEC 2012?

Torsten.
Acclaimed Contributor

Re: HP STORAGEWORKS 1/8 G2 TAPE AUTOLOADER

What connector does the drive have? You need the appropriate HBA (SAS or FC).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!