StoreEver Tape Storage
1745831 Members
4378 Online
108723 Solutions
New Discussion

How to check hot swapping

 
pranay142
Occasional Advisor

How to check hot swapping

The ignite tape drive on one of our server has gone faulty and hp has suggested to replace it. The server is at a remote location and I can not go and check if it supports hot swapping or not.

Is there a way I can check if it can be hot swapped or not?

Thanks in advance.

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: How to check hot swapping

Is it external? in a "tapearray" chassis?

Then it is

 

HP-DAT-40-C7497C-1-DVD-RW-In-HP-StorageWorks-5300-Tape-Array-C7508-60065-5244-p


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!