StoreEver Tape Storage
1745830 Members
3777 Online
108723 Solutions
New Discussion

write error on LTO-6 with LTFS

 
egen
Occasional Advisor

write error on LTO-6 with LTFS

I am trying to use my HP LTO drive Ultrium 6250 with the LTFS wizard in Windows Server 2008 R2. Sametimes I get the following errors. Error occurred while writing occurs near the end of the tape

LTFS20023E Backend SCSI subsystem error from DeviceIOControl (0x48F)

LTFS20042E EIO in write

LTFS12045E Cannot write block: backend call failed (-5). Dropping to read-only mode

Following these errors the device stops responding. I have to restart the server each time after this error.

 

Server HP Proliant DL320s - Windows Server 2008 R2 (HP)

Type Drive LTO-6 Ultrium 6250 (F/W 35BD) - HP windows driver vers. 1.0.7.2

Smart Array P410 (F/W 6.64) - driver vers. 6.28.0.64

HP LTFS 3.1.0

Media - Sony LTO-5 Cartridge

 

now I try copy data to this cartridge but I downgrade the LTFS Standalone to 3.0.0 version

1 REPLY 1
egen
Occasional Advisor

Re: write error on LTO-6 with LTFS

problem temprory solved after downgrade LTFS to 3.0.0 from Quantum site