UCMDB and UD Practitioners Forum (Previously CMS)
Showing results for 
Search instead for 
Do you mean 

uCMDB 9.05 to AM 9.30

Highlighted
Occasional Collector

uCMDB 9.05 to AM 9.30

Hi,

 

Can I use uCMDB 10.0's  AM push adapter in uCMDB 9.05, like in uCMDB 10 ?

To export adapter from 10 and then to import in 9.05 ?

 

thanks,

Pedja

2 REPLIES
HPE Expert

Re: uCMDB 9.05 to AM 9.30

Hi,

Both 9.05 and 10.0 using same code for a push adapter, but general product codebases are different.

You could expect that your mapping files ported manually will work in 9.05 same way, but direct deployment doesn't supported.

Please be sure you're using latest CUP on top of 9.05.

For your convinience CUP8 for UCMDB 9.05 could be found at http://support.openview.hp.com/selfsolve/document/FID/DOCUMENTUM_UCMDB_00100.

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at bottom to say 'Thanks'.
HPE Expert

Re: uCMDB 9.05 to AM 9.30

I checked this with R&D and the answer is NO. You can't do this.

There is a very good reason why CP11 for version 9 doesn't contain many resources that are part of CP11 for version 10 do. The push to AM is one of them… there are many changes in the engine that made the push to AM possible and are not part of the 9 version.

Regards
-Dmitry Gomel, PMP
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Click the Like button at bottom to say 'Thanks'.