Unified Functional Testing Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

Infragistics control testing with QTP 11

Occasional Contributor

Infragistics control testing with QTP 11

I recently upgraded to QTP version 11. Now when I try to record an application that uses Infragistics controls the objects are not properly recognized. Has anybody else ran into this problem? I am using version 9.1 of Infragistics TestAdvantage.
3 REPLIES
Honored Contributor Honored Contributor

Re: Infragistics control testing with QTP 11

What version of the Infragistics development tools (NetAdvantage?) was used? The TestAdvantage version has to match.
Occasional Contributor

Re: Infragistics control testing with QTP 11

I am using version 2009.1 for both NetAdvantage and TestAdvange. QTP was working fine until the AUT was modified to run the 4.0 .NET framework. This is what compelled me to upgrade to QTP 11.

Occasional Contributor

Re: Infragistics control testing with QTP 11

After digging a little deaper it appears that it is just some controls that are not recognized. Mainly combo boxes are the problem.