Unified Functional Testing (formerly QTP) News and Support Forum
Showing results for 
Search instead for 
Do you mean 

QTP / UFT connectivity issue

Occasional Visitor

QTP / UFT connectivity issue

[ Edited ]

We're having connectivity issue for clients trying to connect to UFT11.52, always getting a "license not found" error when connecting (using a QTP license).

Our UFT is nat'ed behind a public router, we sniffed the session and we basically see :
-incoming UDP packets from client towards port 5093 correctly received
- After 4 seconds, the server is sending back an ICMP TTL Exceed (Fragments reassembly time exceeded) back to the client (and then the client got its license error).

Difficult to trace the source of the issue - Could MTU be one ? apart from the UDP/5093, are there other port forwarding required on the router facing the server ?



P.S. This thread has been moved from Quality Center Support and News Forum to Unified Functional Testing (formerly QTP) News and Support Forum.
-HP Forum Moderator

HPE Expert

Re: QTP / UFT connectivity issue

Hi Jerome,


Could you please ask this question in the QTP/UFT forum: http://h30499.www3.hp.com/t5/Functional-Testing-QTP/ct-p/sws-Fun_Test ?  This is the QTP/UFT dedicated forum and there the QTP experts can assist you.

Here, in this forum, we are discussing QC/ALM issues.




HP QC Support Engineer
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.