Unified Functional Testing Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

UFT 11.5 not spying the objects properly on IE

Highlighted
Occasional Visitor

UFT 11.5 not spying the objects properly on IE

After upgrading QTP to UFT 11.5, the object spy is identifying objects off the line. For eg: when try to spy on a text box, if I point the spy on the text box it doesn't identify it. I have to point it out of the text box towards the right. This was perfectly fine before the upgrade.

3 REPLIES
HPE Expert

Re: UFT 11.5 not spying the objects properly on IE

Hello,

 

From screenshot it can be seen that your browser's zoom level is set to 95%.

Could you please set it to 100% and check again the problem?

 

Regards,

Ana

 

“HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.”
Occasional Visitor

Re: UFT 11.5 not spying the objects properly on IE

object spy does not work 

Senior Member

Re: UFT 11.5 not spying the objects properly on IE

I was having a similar problem. I found a fix. IE has a Zoom level. Right Click on the GEAR (top-right corner), click on/check/enable Status Bar.  Now @ the bottom-right corner of the browser window you will see the Zoom level. Change it to 100%. It worked for me.