HPE Community
IP Telephony - VCX
1753767 Members
5736 Online
108799 Solutions
New Discussion

FAX on VCX V7111 analog FXS to NBX E1/ISDN line

 
Sabbah
Occasional Advisor

‎03-03-2011 04:01 AM - edited ‎03-03-2011 04:03 AM

‎03-03-2011 04:01 AM - edited ‎03-03-2011 04:03 AM

FAX on VCX V7111 analog FXS to NBX E1/ISDN line

Hi, I have NBX V3001R running software ver. 6_5_22, with chassis and E1/ISDN line. I want to connect FAX machines to this NBX. I used to do that by ATA, but now the ATA is discontinued and End-Of-Sale. I am looking at alternatives. I read somewhere that the VCX V7111 Analog FXS gateway may meet my requirement provided that the NBX is working in SIP mode. I read the manual of VCX V7111, and was looking for FAX support information. I read it supports the T.38 for Fax over IP, but not sure how this will inter-communicate with the NBX system. I am confused about how the final setup should be. The NBX has a chassis with E1 (PRI ISDN) card. I need the analog fax machines connected to the VCX V7111, to be able to send and receive faxes over the E1/ISDN line. Can somebody help with configuration guidlines to acheive that. Has anyone made similar setup? Really in need for a solution.

P.S. Same question I have posted under NBX Board

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.