Remove vPar Error

[Cdiaz]

How can I remove a vPar?

I have a nPar with 2 vPars:
vPar1 = 11.23
vPar2 = 11.31

I have to remove the vPar2 but I get the following error:
# parremove –p vPar2

vparremove: Error: Command version 1.4 is incompatible with monitor version 1.50

How can I remove this vPar???

[Torsten.]

You need to try this with the 11.31 command set, the 11.23 command set cannot do this.

After this you need to boot the vpmon from the 11.23 partition.

[Cdiaz]

Do not understand what you explain more.
How do I delete a partition from which I located and is active??.

vpar2 # vparremove-p vpar2 (this can be done).

How do I boot from vpar1 vpmon (11.23)?

Regards

[Torsten.]

IMHO you have 2 options:

1) boot from the 11.23 vpmon and try from there (reboot system and boot from the 11.23 boot disk /stand/vpmon)

2) boot 11.31 in nPar mode and remove the vPar.

I'm not sure if the 11.23 vpmon can use the vpdb created with the 11.31 version. If not, consider to re-create the 11.23 vPar using the 11.23 command set.