1748186 Members
4234 Online
108759 Solutions
New Discussion

Re: SD 2 resources

 
Mousa55
Super Advisor

SD 2 resources

Hi All,


i have superdome 2 with 2 npar and each npar have 3 vpars, how i can check the free (unused) resources from (IO , Memory , CPU) on each npar ?

Thanks

2 REPLIES 2
Patrick Wallek
Honored Contributor

Re: SD 2 resources

The command:

 

# vparstatus -A

 

will show all resources in the NPAR that have NOT been assigned to a vPar.

Torsten.
Acclaimed Contributor

Re: SD 2 resources

Even on the SD2 the commands are similar. You can run them from the OS or from the OA.

 

OA> vparstatus -A -V -N 1

 

started from OA will show you available resources in nPar 1.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!