1748149 Members
3605 Online
108758 Solutions
New Discussion юеВ

Re: setup virtualisation

 
SOLVED
Go to solution
mulder20
Frequent Advisor

Re: setup virtualisation

I install HP VSE suite , but i can't run any command of hpvmXXX ...


# hpvminfo
sh: hpvminfo: not found.

is ther an other product to install ?
thanks for advises

Mulder
Geoff Wild
Honored Contributor

Re: setup virtualisation

Actually - you can create a guest from a web based GUI - using System Insight Manager.

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
mulder20
Frequent Advisor

Re: setup virtualisation

now it's running
# hpvminfo
hpvminfo: Running on an HPVM host.


please wich GUI do you mean ?

Thanks,

Mulder
Torsten.
Acclaimed Contributor

Re: setup virtualisation

Is the T2767AC product installed.

Any files in /opt/hpvm ?

Check with swlist!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mulder20
Frequent Advisor

Re: setup virtualisation

please i create my vm win1 , but i get those error :


# hpvmcreate -P win1 -O windows -c 1 -r 2G \
> -a disk:scsi::disk:/dev/rdsk/c3t2d0 \
> -a dvd:scsi::disk:/dev/rdsk/c0t0d0 \
> -a network:lan::vswitch:switch1
hpvmcreate: WARNING (host): The vswitch 'switch1' does not exist.
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item switch1: Vswitch 'switch1' does not exist.
These problems may prevent HPVM guest win1 from starting.
hpvmcreate: The creation process is continuing.
# hpvmstatus
[Virtual Machines]
Virtual Machine Name VM # OS Type State #VCPUs #Devs #Nets Memory Runsysid
==================== ===== ======= ========= ====== ===== ===== ======= ========
win1 4 WINDOWS Off 1 2 1 2 GB 0
# hpvmconsole -P win1 -fi -c "pc -on"


vMP MAIN MENU

CO: Console
CM: Command Menu
CL: Console Log
SL: Show Event Logs
VM: Virtual Machine Menu
HE: Main Help Menu
X: Exit Connection

[win1] vMP> pc -on

System will be powered on.

-> System is being powered on.

Please wait for the guest start sequence to complete. Use of the attention
character can prevent the guest from running.
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item switch1: Vswitch 'switch1' does not exist.
These problems may prevent HPVM guest win1 from starting.
hpvmstart: Unable to continue.

-> Command failed.

[win1] vMP> CO



(Use Ctrl-B to return to vMP main menu.)



- - - - - - - - - - Prior Console Output - - - - - - - - - -

- - - - - - - - - - - - Live Console - - - - - - - - - - - -


please have any idea what's was the problems

thanks for advice
Torsten.
Acclaimed Contributor

Re: setup virtualisation

The problem is clearly written on the screen.

hpvmcreate: WARNING (host): The vswitch 'switch1' does not exist.

HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.


>> does not exist <<

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mulder20
Frequent Advisor

Re: setup virtualisation

yes i see the message :
i want to modify the VM but still give this warning :

# hpvmmodify -P win1 -a dvd:scsi::disk:/dev/rdsk/c0t1d0
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item /dev/rdsk/c0t1d0: '/dev/rdsk/c0t1d0' backing device does not exist.
Warning 3 on item switch1: Vswitch 'switch1' does not exist.

i don't know why they cant create disk ?

Thanks for advices
Mulder
Torsten.
Acclaimed Contributor

Re: setup virtualisation

Run on the host:

# hpvmnet
# ioscan -fn

and post the results.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mulder20
Frequent Advisor

Re: setup virtualisation

Hello,

# hpvmnet
Name Number State Mode NamePPA MAC Address IP Address
======== ====== ======= ========= ======== ============== ===============
localnet 1 Up Shared N/A N/A
vswitch 2 Up Shared lan0 0x001cc4fbace7 192.168.100.212
clan1 3 Down Shared lan1
#
# ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (4030)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
tty 0 0/0/1/0 rmp3f01 CLAIMED INTERFACE PCI class(255,0) (103c1303)
tty 1 0/0/1/1 rmp3f01 CLAIMED INTERFACE PCI SimpleComm (103c1302)
tty 2 0/0/1/2 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/diag/mux2 /dev/mux2 /dev/tty2p0
OO 0 0/0/2/0 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 1 0/0/2/0.0 UsbMiniBus CLAIMED INTERFACE USB Composite Device
OO 2 0/0/2/0.0.0 UsbBootKeyboard CLAIMED DEVICE Virtual Keyboard
unknown -1 0/0/2/0.0.1 UNCLAIMED UNKNOWN OO Device Driver
unknown -1 0/0/2/0.1 UNCLAIMED UNKNOWN OO Device Driver
OO 3 0/0/2/1 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 4 0/0/2/1.0 UsbMiniBus CLAIMED INTERFACE USB Composite Device
OO 5 0/0/2/1.0.0 UsbBulkOnlyMS CLAIMED DEVICE USB Bulk Only
ext_bus 0 0/0/2/1.0.16 UsbScsiAdaptor CLAIMED INTERFACE USB SCSI Stack Adaptor
target 0 0/0/2/1.0.16.0 tgt CLAIMED DEVICE
disk 2 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-V
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/2/1.0.16.7 tgt CLAIMED DEVICE
ctl 1 0/0/2/1.0.16.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
OO 6 0/0/2/2 UsbEhci CLAIMED INTERFACE USB EHCI Interface
graphics 0 0/0/3/0 gvid_core CLAIMED INTERFACE PCI Display (1002515e)
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
escsi_ctlr 0 0/1/1/0 sasd CLAIMED INTERFACE HP PCI/PCI-X SAS MPT Adapter
/dev/sasd0
ext_bus 1 0/1/1/0.0.0 sasd_vbus CLAIMED INTERFACE SAS Device Interface
target 2 0/1/1/0.0.0.0 tgt CLAIMED DEVICE
disk 1 0/1/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DG072BB975
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
/dev/dsk/c1t0d0s1 /dev/rdsk/c1t0d0s1
/dev/dsk/c1t0d0s2 /dev/rdsk/c1t0d0s2
/dev/dsk/c1t0d0s3 /dev/rdsk/c1t0d0s3
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
lan 1 0/1/2/1 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
ba 2 0/2 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 3 0/2/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ba 4 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
unknown -1 0/3/1/0 UNCLAIMED UNKNOWN PCI-X SerialBus (10772422)
ba 5 0/4 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 6 0/4/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
processor 0 120 processor CLAIMED PROCESSOR Processor
processor 1 121 processor CLAIMED PROCESSOR Processor
ba 7 250 pdh CLAIMED BUS_NEXUS Core I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
tty 3 250/1 asio0 CLAIMED INTERFACE Built-in RS232C
/dev/diag/mux3 /dev/mux3 /dev/tty3p0
acpi_node 0 250/2 acpi_node CLAIMED INTERFACE Acpi Hardware
#

Thanks for advices
Mulder
Torsten.
Acclaimed Contributor

Re: setup virtualisation

>> Warning 3 on item switch1: Vswitch 'switch1' does not exist

Correct! You have the following:

localnet 1 Up
vswitch 2 Up
clan1 3 Down

>> Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item /dev/rdsk/c0t1d0: '/dev/rdsk/c0t1d0' backing device does not exist.

Correct!

Your "real" DVD drive is

disk 2 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-V
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!