HP V1910 SNMP configuration

[MicroRichard]

Hi,

I have a problem on my 1 HP V1910 Switch SNMP Configuration.

On my 3 HP V1910 switches I successfully enabled SNMP

What I observed is that

The HP V1910 have a MiB of ViewDefault

on my 3 switches, MiB ViewDefault has no problem.

on my other switch, MiB ViewDefault says "nonexistent" tried to Add View and copied the configuration of ViewDefault from my other switches but I was not able to create it.

After I click "Apply" it wont proceed to Add the ViewDefault.

Anyone experiencing the same problem?

Here is the Working View DEfault

publicRead onlyViewDefault     

privateRead and writeViewDefault       

ViewDefault

       

  Included 1            Excluded 1.3.6.1.6.3.15            Excluded 1.3.6.1.6.3.16            Excluded 1.3.6.1.6.3.18

Here is the problem of my switch that can't connect to a SNMP server

publicRead onlyViewDefault ( Nonexistent )     

privateRead and writeViewDefault ( Nonexistent )       

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp Forum Moderator

[Ivo Suste]

Latest firmware for HP V1910-16G has serious faults in web interface: After fw upgrade, I am no longer able to click into any important item without being bounced back to logon screen. After two or 3 repreated logins I get locked out because of "too many users logged".

This did not happen with 1111P01 version .....