How to set up QoS (port based) for HP ProCurve 1810G - 24 GE

[dan0el]

We are trying to set up QoS (port based or protocol based) on a HP ProCurve 1810G - 24 GE,

but so far have found no guides on how to do it. Does anyone have a guide on how to do this?

Thanks

P.S. This thread has been moved from ProCurve / ProVision-Based to web & unmanaged forum. - HP Forum Moderator

[Emil_G]

Hello,

http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.rid_ba847bafb2a2d782fcbb0710b053ce01=docDisplayResURL&javax.portlet.rst_ba847bafb2a2d782fcbb0710b053ce01=wsrp-resourceState%3DdocId%253Demr_na-c02563753-1%257CdocLocale%253Den_US&ja...

Please go to page 7-2 for port based priority

You have to go to VLANs > VLAN Ports >Port Priority

Port Priority

Specify the default 802.1p priority assigned to untagged packets arriving at the port. A value of

0 indicates the lowest priority, commonly used for routine traffic, and 7 indicates the highest

priority, often reserved for application such as voice and video. (0–7, default = 0)

As far as I know the switch should honor 802.1p priority set by end devices by default when it receives tagged traffic.

HTH