V1910 Inter-VLAN Routing

[rtechie]

So the primary reason I bought a V1910 was so I could use the static routing on the switch to bypass the router. I just wanted to make sure I'm configuring everything correctly. I've got 3 switches, the V1910 is the "core" switch, the others are Linksys1 and Linksys2.

Router IP: 10.0.0.1

V1910 IP: 10.0.10.2

I have 4 VLANs on the V1910 with assigned IP addresses:

VLAN 10

IP: 10.0.10.1

VLAN 20

IP: 10.0.20.1

VLAN 40

IP: 10.0.40.1

VLAN 50

IP: 10.0.50.1

And I've configured the routes as:

Destination IP    Mask    Next Hop

0.0.0.0    0.0.0.0    10.0.0.1

10.0.20.0    255.255.255.0    10.0.10.3

10.0.50.0    255.255.255.0    10.0.10.4

Linksys1 is configured with:

Switch IP: 10.0.10.3

VLAN 20

IP: 10.0.20.2

Default route:

Destination IP    Mask        Next Hop

0.0.0.0    0.0.0.0.    10.0.10.2

Linksys2 is configured with:

Switch IP: 10.0.10.4

VLAN 50

IP: 10.0.50.2

Default route:

Destination IP    Mask        Next Hop

0.0.0.0    0.0.0.0.    10.0.10.2

Is that it? Will this work?