Operating System - HP-UX
1745840 Members
4500 Online
108723 Solutions
New Discussion юеВ

Re: LDAPUX with SASL/GSSAPI

 
John M Clark
Occasional Advisor

LDAPUX with SASL/GSSAPI

Has anyone configured HP-UX 11i V3 as an LDAPUX Client to a Windows 2003 Domain Controller using the SASL/GSSAPI authentication. I have configued LDAPUX with the SIMPLE authenication method. But with SASL/GSSAPI using a host account we just cannot search or connect to the DOMAIN controllers
4 REPLIES 4
Ivan Krastev
Honored Contributor

Re: LDAPUX with SASL/GSSAPI

Have you checked this documentation - http://docs.hp.com/en/J4269-90084/ch07s03.html

regards,
ivan
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Hi, the problem appears to be concentrated about the kerberos authentication. While performing a kinit or kdestroy for fault finding we receive Client not found in the Kerberos database.
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Hi, not sure if you are able to assist further, but from the pamkrbval -v -ia64 command I get
Client no found in the Kerberos Database. Our Windows Admin advises the AD is set up correctly.

regards
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Issue was down to kerberos issues