Occasional Contributor
Converting RAID0 -> RAID1

I'm planning to install two new disks in a LH3 Netserver using a netraid 1M controler.
For the moment The machine use two disks (9GB, 36GB) in a RAID0 system without mirroring. The new disks having the same capacity as the installed disks.
For mirroring I want change the Raid level from 0 to 1 (If possible without loosing data).
Is it possible?
What's the right way to do this?
The server use Netware 5.0 Sp6a.

Thanks in advance for your advice.

Best regards.

Dirk Emmermacher
Dirk Emmermacher