Re: error while starting cmu service

Hello,

 

When tftp doesn't work, it may either be a firewall issue (if the firewall is enabled), an SELinux issue (if SELinux is enabled), or a hostname issue. Regarding the hostname issue: make sure that localhost and the loopback IP and the hostname and IP address are both configured in the /etc/hosts file.

 

A good way to test your configuration is to run '/opt/cmu/bin/cmu_mgt_config -t'. If there are errors, then you can either fix them manually or run '/opt/cmu/bin/cmu_mgt_config -c' to properly configure your CMU management node.

 

Hope this helps.

 

Regards,

--Chris