Honored Contributor Honored Contributor
Re: Add a Xerox printer as a remote printer.

>>"Receive NO snmp response" 


Just because you receive that, it does not mean that the Jetdirect interface is disabled.  SNMP may be disabled.  A previous employer required, due to "security" scans, that SNMP be disabled on all printers as it was a security risk.


Try telnet'ing to the printers IP address and specify port 9100 and see if you get a response.  For example:


# telnet dalsharp 9100
Connected to dalsharp.
Escape character is '^]'.


This means that the 'dalsharp' device on my network is responding on port 9100.  If I try to telnet on a port that does not respond, then I get:


# telnet dalsharp 9101
telnet: Unable to connect to remote host: Connection refused


So, if your printer answers on port 9100, try setting it up as Bill mentioned.