Honored Contributor Honored Contributor
Re: Re-Configure a HP/UX11i network config after moving from one site to another

>> console etc) will ALSO need a new ip address

 

Good catch.

 

Yes, the console must be changed too.

 

You telnet to the current console (you can do this even when the main server is shutdown) and type CTRL-B. That will give you the MP login prompt. Once you have the login menu, you'll see CM as an option. Type CM (or cm) and then LC to set the new IP addresses (and subnet mask, gateway, etc). Then to return back to the main menu, type MA (or ma).