Hewlett Packard Enterprise Community
Showing results for 
Search instead for 
Do you mean 
Hello Rahul, I am not sure that I follow. What's the current status? From the latest log file you...
by on ‎04-07-2015 02:31 PM
0 Replies 877 Views
0 Replies
877 Views
Hello, What do you mean "not recognizing ports", and how does NNMi report them Down, via Incident ...
by on ‎03-18-2015 01:23 PM
1 Reply 533 Views
1 Reply
533 Views
Hello   Looks like you're experiencing some sort of File permission problem. Unfortunately no mor...
by on ‎03-17-2015 10:13 AM
3 Replies 1027 Views
3 Replies
1027 Views
Hello Simon   What's happening here is that when a Node Management mode is changed, a notificatio...
by on ‎03-17-2015 10:06 AM
4 Replies 775 Views
4 Replies
775 Views
Hello,   Let me first admit that I don't know the integration with SHR nor have I read the docume...
by on ‎09-16-2013 07:13 PM
0 Replies 687 Views
0 Replies
687 Views
Hello.   The SSO integration between NNMi and iSPI for Metrics allows you to change your NNMi pas...
by on ‎08-08-2013 10:13 AM
0 Replies 830 Views
0 Replies
830 Views
Hello   The source sending the trap (your HMC server) needs to be added as a managed node into NN...
by on ‎08-05-2013 03:01 PM
3 Replies 1427 Views
3 Replies
1427 Views
Hi Unfortunately the same is not available! Feel free to submit an ER at http://support.openview....
by on ‎07-11-2013 01:12 PM
0 Replies 712 Views
0 Replies
712 Views
Hello,   So what you need is the encryption algorithm to encrypt a password and put it (if possib...
by on ‎07-10-2013 02:35 PM
2 Replies 722 Views
2 Replies
722 Views
Hello Arjay After the installation finishes, if you want to change the password you can use nnmch...
by on ‎07-08-2013 08:41 AM
4 Replies 752 Views
4 Replies
752 Views
Hi   As mentioned by Fernando, unfortunately you can't use multiple "contains" or "equals" entrie...
by on ‎07-03-2013 11:39 AM
0 Replies 477 Views
0 Replies
477 Views
Hello,   AFAIK the health indicators (HI) that set the CI status in BSM (or myBSM) are sent by NN...
by on ‎06-20-2013 09:32 AM
0 Replies 2317 Views
0 Replies
2317 Views
Hello Clarence,   In general, when you run loadhosts, it is recommended to stop netmon first...
by on ‎12-07-2012 11:52 AM
3 Replies 338 Views
3 Replies
338 Views
You can change Maps auto-refresh settings under Configuration > User Interface > Node Group Map Se...
by on ‎09-21-2012 02:41 PM
0 Replies 5192 Views
0 Replies
5192 Views
Configuration > User Interface > User Interface Configuration > Enable Table Row Shading
by on ‎09-21-2012 02:39 PM
1 Reply 5193 Views
1 Reply
5193 Views
Hello,   I haven't done that because as you mentioned, it is not officially supported.   I know...
by on ‎08-17-2012 03:50 PM
2 Replies 379 Views
2 Replies
379 Views
Hello. The configuration you will find it in my last post, take a look at the attached image! Good...
by on ‎03-28-2012 08:08 AM
0 Replies 330 Views
0 Replies
330 Views
Hi, Make sure the configuration is like the one image attached If that's correct please open up a...
by on ‎03-27-2012 02:44 PM
3 Replies 351 Views
3 Replies
351 Views
If you have reset the configuration to default then this configuration will apply for new incoming ...
by on ‎03-27-2012 07:19 AM
5 Replies 359 Views
5 Replies
359 Views
Hi, that's better :) and yes, this is the logic. But there is no need for you to use cia.address s...
by on ‎03-26-2012 08:05 AM
8 Replies 386 Views
8 Replies
386 Views