VCX
Hi,   The VCX does not have this feature.
by on ‎01-22-2013 05:13 AM
1 Reply 489 Views
1 Reply
489 Views
IMC
Hi,   The default login for IMC is admin with a password of admin   I suggest using either Fire...
by on ‎01-18-2013 05:46 AM
2 Replies 952 Views
2 Replies
952 Views
VCX
Hi,   Desktop Communicator can be found on the ftp.usa.hp.com FTP site. The login is connect and ...
by on ‎12-17-2012 05:58 AM
1 Reply 649 Views
1 Reply
649 Views
VCX
Hi,   This issue has been documented in the HP Knowledgebase, although the document is written wi...
by on ‎12-11-2012 06:32 AM
0 Replies 295 Views
0 Replies
295 Views
VCX
Hi Gareth,   I don't know what might be causing this issue. I suggest opening a case with HP Tech...
by on ‎11-20-2012 10:14 AM
0 Replies 341 Views
0 Replies
341 Views
VCX
Hi,   If the people are members of the same Hunt Group or ACD Group, then the Hunt Group and ACD ...
by on ‎11-08-2012 11:25 AM
0 Replies 182 Views
0 Replies
182 Views
Hi Svanto,   Using an HP 4110 or 4120 IP phone without having access to a Lync server is not supp...
by on ‎10-30-2012 06:11 AM
0 Replies 312 Views
0 Replies
312 Views
VCX
Hi Gareth,   What happens if you walk up to a fax machine and dial the fax number exactly as IP M...
by on ‎10-12-2012 11:04 AM
1 Reply 359 Views
1 Reply
359 Views
VCX
Hi,   I'm not familiar with that Tomcat error. I once again suggest either searching the support ...
by on ‎09-28-2012 10:43 AM
0 Replies 312 Views
0 Replies
312 Views
VCX
Hi,   There are many reasons why this might occur. The most common are that there is a hung backu...
by on ‎09-28-2012 05:25 AM
2 Replies 319 Views
2 Replies
319 Views
VCX
Hi Sasha,   I think the best approach would be to create two users, two phones and give each user...
by on ‎09-14-2012 09:26 AM
0 Replies 214 Views
0 Replies
214 Views
VCX
Hi,   The following login information worked for me a few minutes ago:   ftp.usa.hp.com user=h...
by on ‎09-13-2012 08:23 AM
0 Replies 801 Views
0 Replies
801 Views
Hi,   The HP 3100 Series IP Phones are only supported with the NBX and VCX PBX systems.   The H...
by on ‎09-04-2012 11:57 AM
0 Replies 308 Views
0 Replies
308 Views
VCX
Hi,   You're welcome. You changed that value to 1 to enable it. Next, burn the configuration of t...
by on ‎08-15-2012 08:38 AM
0 Replies 363 Views
0 Replies
363 Views
VCX
Hi,   No, those options do not require 5.x gateway software. They were available via the AdminPag...
by on ‎08-14-2012 08:52 AM
2 Replies 378 Views
2 Replies
378 Views
VCX
Hi,   If you use the option Bridge Transfer instead of Transfer to Phone, then if the caller dial...
by on ‎07-12-2012 05:28 AM
1 Reply 338 Views
1 Reply
338 Views
VCX
Hi,   The initial configuration of V7111 FXO and FXS gateways is largely covered in the documenta...
by on ‎07-05-2012 08:34 AM
1 Reply 229 Views
1 Reply
229 Views
VCX
Hi Neil,   Please open a case with HP Technical Support. They will assist you with recovering the...
by on ‎07-05-2012 08:31 AM
2 Replies 624 Views
2 Replies
624 Views
VCX
Hi Andres,   It is most likely a configuration on the VCX and/or the FXS and FXO gateway. Trouble...
by on ‎06-20-2012 10:34 AM
0 Replies 667 Views
0 Replies
667 Views
VCX
Hi Raizen,   Yes, the Connect 100 comes with integrated FXO and FXS ports. You can use the FXO po...
by on ‎06-07-2012 11:07 AM
2 Replies 706 Views
2 Replies
706 Views