Hewlett Packard Enterprise Community
Showing results for 
Search instead for 
Do you mean 
hi,   I don't know how service module show their "NIC" under your OS, but using Intel ProSet you ...
by on ‎03-22-2012 04:41 AM
1 Reply 570 Views
1 Reply
570 Views
by on ‎03-17-2012 02:01 PM
0 Replies 801 Views
0 Replies
801 Views
Hi,   Sorry but i don't understand something ;-)   Do you lost the running-configuration ? Or ...
by on ‎03-16-2012 07:27 AM
2 Replies 812 Views
2 Replies
812 Views
Hi, I haven't lost ifindex configuration with 8212/5406 and 3500 (option slot) after a reload. D...
by on ‎03-16-2012 07:00 AM
4 Replies 816 Views
4 Replies
816 Views
Hi,   This Cisco option is not needed with "procurve" switch, i don't know for H3C/3COM.   Bye,...
by on ‎03-16-2012 06:07 AM
6 Replies 820 Views
6 Replies
820 Views
Hi,   Have you tried with a different ipv4 protocol and DSCP (and so on queue) values ?   I can...
by on ‎03-15-2012 02:26 PM
1 Reply 1663 Views
1 Reply
1663 Views
Hi,   Sorry but the "press any key to continue" is hiding the most interesting information regard...
by on ‎03-15-2012 02:23 PM
3 Replies 514 Views
3 Replies
514 Views
PCM
Hi,   This should be the link : ftp://ftp.hp.com/pub/networking/software/PCM-Software-022322.zip...
by on ‎03-15-2012 08:25 AM
0 Replies 442 Views
0 Replies
442 Views
Hi,   There is a bug with NTP running some K.14.xx//K.15.xx releases, you can check for the relea...
by on ‎03-15-2012 03:35 AM
1 Reply 4538 Views
1 Reply
4538 Views
Hi,   Have you take a packet capture on the link between the HP and the Cisco device ?   The To...
by on ‎03-15-2012 02:14 AM
3 Replies 1674 Views
3 Replies
1674 Views
hi,   I'm running K.15.07.0004 on one 3500yl without problem.   I have this versions because of...
by on ‎03-13-2012 03:25 AM
1 Reply 304 Views
1 Reply
304 Views
Hi,   There is only one model that support real stack, 3800. All other HP E-Series are doing stac...
by on ‎03-07-2012 04:33 AM
0 Replies 1113 Views
0 Replies
1113 Views
Hi,   Do you have any news about the evolution of this situation ?   Thanks in advance, Sylvai...
by on ‎02-15-2012 07:57 AM
0 Replies 1921 Views
0 Replies
1921 Views
Hi,   For your information, i'm a partner we have had to wait until K.15.06.0009 or K.15.07.xxxx ...
by on ‎02-08-2012 12:54 AM
0 Replies 9425 Views
0 Replies
9425 Views
hi,   Unfortunately this option (precedence, priority,  server ID, etc.) is not available on E-Se...
by on ‎02-08-2012 12:52 AM
0 Replies 119 Views
0 Replies
119 Views
hi,   It is not possible from the HP E-Series swtch. I have check the telnet command from a 3500y...
by on ‎02-08-2012 12:48 AM
0 Replies 421 Views
0 Replies
421 Views
Hi,   Do you have any information about this event in ? show log -r -a show system power-supply...
by on ‎02-08-2012 12:30 AM
14 Replies 13362 Views
14 Replies
13362 Views
Hi,   There are no "no" or "clear" option to revert back the port to its default config for these...
by on ‎01-26-2012 06:55 AM
1 Reply 2164 Views
1 Reply
2164 Views
Hi,   In the Multicast and Routing guide :   "Number of IP Multicast Addresses Allowed The num...
by on ‎01-17-2012 01:39 AM
0 Replies 190 Views
0 Replies
190 Views
Hi,   If you can't find anything else on the web, yes it is the last GA update (General Availabil...
by on ‎01-09-2012 07:30 AM
1 Reply 144 Views
1 Reply
144 Views