Hewlett Packard Enterprise Community
Showing results for 
Search instead for 
Do you mean 
It's not free but one of the most powerful methods is a product called Unform (www.unform.com) --- I...
by Acclaimed Contributor on ‎03-11-2008 04:27 PM
0 Replies 871 Views
0 Replies
871 Views
How are you deleteing the cron job? If you simply edit the files under /var/spool, you have done not...
by Acclaimed Contributor on ‎03-05-2008 05:32 PM
0 Replies 659 Views
0 Replies
659 Views
... and in general don't go nuts on setting these guys to large values even in 64-bit land. For 3...
by Acclaimed Contributor on ‎03-05-2008 04:28 PM
0 Replies 444 Views
0 Replies
444 Views
Bear in mind that a snapshot is read-only so that talking about writes on a snapshot is a non sequit...
by Acclaimed Contributor on ‎03-05-2008 04:21 PM
0 Replies 470 Views
0 Replies
470 Views
One of the best products that I have used for many years is Unform. http://www.unform.com/ It's n...
by Acclaimed Contributor on ‎01-31-2008 05:41 PM
0 Replies 2021 Views
0 Replies
2021 Views
Bear in mind that you will probably also have to do a find with -exec to chown any files owned by th...
by Acclaimed Contributor on ‎01-30-2008 07:51 PM
0 Replies 339 Views
0 Replies
339 Views
Consider what is going to happen when you reboot this box. The /tcb filesystem will not be mounted i...
by Acclaimed Contributor on ‎01-29-2008 09:48 PM
0 Replies 32 Views
0 Replies
32 Views
Your question has almost no meaning because it lacks any context. It is fairly easy to periodically ...
by Acclaimed Contributor on ‎01-29-2008 09:43 PM
0 Replies 20 Views
0 Replies
20 Views
Off the top of my head, ports 0, 1, and 7 are reserved. First make sure that the mux driver is in th...
by Acclaimed Contributor on ‎01-29-2008 06:42 PM
0 Replies 205 Views
0 Replies
205 Views
When you use ftp to copy a file, the file owner is that of the ftp user. A better way to preserve at...
by Acclaimed Contributor on ‎01-24-2008 05:43 PM
0 Replies 314 Views
0 Replies
314 Views
Your commands are backwards. Run ioscan then insf. I would simply do: ioscan -fn insf ioscan ...
by Acclaimed Contributor on ‎01-24-2008 02:33 PM
0 Replies 22 Views
0 Replies
22 Views
Run the cksum command against the two files; the CRC algortihm of cksum is much stronger than that o...
by Acclaimed Contributor on ‎01-24-2008 02:21 PM
0 Replies 730 Views
0 Replies
730 Views
All you know is that you have a vg backup at some point im time of the VG in question. Do a vgdis...
by Acclaimed Contributor on ‎01-23-2008 06:33 PM
0 Replies 70 Views
0 Replies
70 Views
Anytime a new queue is added to the lp subsystem the scheduler must be stopped and then restarted af...
by Acclaimed Contributor on ‎01-23-2008 01:33 PM
0 Replies 200 Views
0 Replies
200 Views
No, there is no modprpw command to update the last password change time (which is what would be requ...
by Acclaimed Contributor on ‎01-23-2008 01:30 PM
0 Replies 130 Views
0 Replies
130 Views
Save yourself a ton of work and do a search in the Forums for a script of Bill Hassell's called "bdf...
by Acclaimed Contributor on ‎01-22-2008 05:02 PM
0 Replies 46 Views
0 Replies
46 Views
If you want 666 mode set for files then umask must be set to 000 but this is a necessary but not nec...
by Acclaimed Contributor on ‎01-22-2008 10:17 AM
0 Replies 260 Views
0 Replies
260 Views
If you can't change the intermediate shell then you cannot remove the shift. You did not say that yo...
by Acclaimed Contributor on ‎01-21-2008 08:52 PM
0 Replies 244 Views
0 Replies
244 Views
That's because the ;1 is not actually the filename but is rather a version extension --- at least fo...
by Acclaimed Contributor on ‎01-21-2008 08:47 PM
0 Replies 49 Views
0 Replies
49 Views
Note that yanking a network cable or yanking a SCSI/Fibre cable does not actually test a node. In fa...
by Acclaimed Contributor on ‎01-21-2008 08:01 AM
0 Replies 52 Views
0 Replies
52 Views