Hewlett Packard Enterprise Community
Showing results for 
Search instead for 
Do you mean 
Hi Manish, When they can't communicate let them try the following: Windows - ipconfig /all - p...
by Honored Contributor on ‎03-08-2008 10:53 PM
0 Replies 159 Views
0 Replies
159 Views
Davis, You don't need to do this in single user mode if you have OnlineJFS installed. # lvexte...
by Honored Contributor on ‎03-08-2008 10:42 PM
0 Replies 123 Views
0 Replies
123 Views
Hi, Can you please verify if you have the latest recommended fcms patch (PHKL_33827) or Latest PH...
by Honored Contributor on ‎03-05-2008 06:04 AM
0 Replies 1025 Views
0 Replies
1025 Views
Hi, Make sure you've a good backup, before you start. Make a listing of what your current LVM co...
by Honored Contributor on ‎03-05-2008 12:12 AM
0 Replies 243 Views
0 Replies
243 Views
Sachin, Do you see any messsages regarding your Fibre in your syslog? After you've run the iosca...
by Honored Contributor on ‎03-05-2008 12:00 AM
0 Replies 1027 Views
0 Replies
1027 Views
Manish, Have you read the following: http://www.sudo.ws/sudo/readme_ldap.html GoodLuck Darre...
by Honored Contributor on ‎03-04-2008 04:20 AM
0 Replies 158 Views
0 Replies
158 Views
Hi, When the server startsup it will run the insf command to detect new hardware (in rc level 1),...
by Honored Contributor on ‎03-04-2008 03:42 AM
0 Replies 95 Views
0 Replies
95 Views
by Honored Contributor on ‎03-04-2008 03:37 AM
0 Replies 82 Views
0 Replies
82 Views
Dusty, Can you check if you can login via telnet. If it works via telnet, check your sshd_config...
by Honored Contributor on ‎03-02-2008 01:06 AM
0 Replies 32 Views
0 Replies
32 Views
Hi, With "netstat -af net" or "lsof -i" you can check for ports listening(open). First of all yo...
by Honored Contributor on ‎03-02-2008 12:43 AM
0 Replies 205 Views
0 Replies
205 Views
Hi, Can you please post the following info: lvlnboot -v pvdisplay -v /dev/dsk/c3t15d0 pvdispla...
by Honored Contributor on ‎02-29-2008 06:45 AM
0 Replies 33 Views
0 Replies
33 Views
Hi, Is this is a Cluster or none Cluster VG? If you can specify the error we can help you Dar...
by Honored Contributor on ‎02-29-2008 06:33 AM
0 Replies 33 Views
0 Replies
33 Views
Hi, Check in /sbin/init.d for your startup script. example: /sbin/init.d/sshd stop /sbin/init....
by Honored Contributor on ‎02-27-2008 01:14 AM
0 Replies 137 Views
0 Replies
137 Views
Hi, Hit enter to fast: cstm: echo "scl q fibre;cds;wait;done" | cstm | grep -i tachyon fcmsu...
by Honored Contributor on ‎02-27-2008 01:12 AM
0 Replies 74 Views
0 Replies
74 Views
Hi, The following commands can be used: - ioscan -fnk - fcmsutil - cstm GoodLuck Darrel
by Honored Contributor on ‎02-27-2008 01:09 AM
0 Replies 74 Views
0 Replies
74 Views
Hi. HP-UX11iv2: http://www.docs.hp.com/en/B2355-60105/bufpages.5.html HP-UX 11iv3: http://d...
by Honored Contributor on ‎02-27-2008 01:06 AM
0 Replies 69 Views
0 Replies
69 Views
Hi, To see where your sshd_config file is: find / -name sshd_config Remember to restart sshd ...
by Honored Contributor on ‎02-27-2008 12:45 AM
0 Replies 137 Views
0 Replies
137 Views
Hi, Do you see any error messages in your syslog, something like could not fork or no buffer spac...
by Honored Contributor on ‎02-27-2008 12:03 AM
0 Replies 1138 Views
0 Replies
1138 Views
David, Check if your VxVm is Licensed vxlicense -t VxVM vxlicense -p ioscan -fn insf -e vx...
by Honored Contributor on ‎02-26-2008 11:40 PM
0 Replies 257 Views
0 Replies
257 Views
Peter, I've tried version openssh-4.4p1, but resulted in the same problem. Regards Darrel Lou...
by Honored Contributor on ‎01-19-2007 08:33 PM
0 Replies 27 Views
0 Replies
27 Views