Posted to: ProLiant Servers (ML,DL,SL)
13 hours ago long story short my server booted and ilo had "unknown" beside ipv4 address. i reset it, resetarted it and re set it up and same thing. no activity lights either. i have it on the shared port setting and the other nics work fine. nothings changed so ... Posted to: HPE Nimble Storage Solution Specialists
an hour ago We buy Shelf for our Alletra Array 6090, but when we read the Caution about to activate , we dont know it all the service have to shutting down before? Posted to: BladeSystem - General
3 weeks ago smart Array P220i in Embedded slot cache status problem detected: the cache on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed.PLease replace the cache to be able to continue to configure... Posted to: Servers - General
6 hours ago We are looking for oid files for the new ProLiant DL20 Gen10 Plus to use with our monitoring software. Searched online and unable to locate oid files for new DL20 Gen10.We have DL360 and DL380 up to gen 10 and are just nissing the DL20 Gen10 oid file... Posted to: ProLiant Servers - Netservers
5 hours ago Hi HPE!I am in trouble and need support from you. It looks like I am out of ideas, as are other third-party internet board members.This is the original thread on Reddit. And this is the second thread on the STH board. Long story short, I got two of t... Posted to: MSA Storage
yesterday Hi all, this is the problem of iscsi connections between the storage and the server, but there's no attached volume, Please tell me the correct way to grant access on the storage side, if you could elaborate on the instructions, thank yousupplements... Posted to: Recovery Manager Central
6 hours ago Whatspp: +4915217110577- Buy ready to use high quality counterfeit bank notes in grade A quality, Are you looking for where you will buy the best quality fake money in town? Here you're at the right place to end your financial problem in a couple of ... Posted to: HPE OneView
9 hours ago PLEASE IGNORE - I'm just going to deploy a new one and start again with it! I have inherited a neglected OneView install, which is on version 4.10.I'd like to get this up-to-date, the inital upgrade path is 4.10.01 > 4.20.01.01 > 5.20.01 and onwards:... Posted to: HPE OneView
11-27-2023 As regular SPPs are only released by HPE few times a year, I usually take the provided SPP + Supplements ISO in OneView/vLCM. On the SPP download side there are now:Existing Base SPPs:Gen10 SPP 2023.09.00.00 with file P64606_001_gen10spp-2023.09.00.0... Posted to: ProLiant Servers (ML,DL,SL)
yesterday The client recently had the Smart Array P440ar controller replaced about 2 months ago. The client is complaining of slowness issues. The one yellow flag I'm seeing so far is that there are not status messages in the Smart Storage Administrator. I...
