GPU for proliant dl380 gen11

[TQB1]

We currently have HPE ProLiant DL380 Gen11

 looking to have cost effective GPU for these servers, currently we have tried RTX 4090 which does not fit.

Are there any GPU which are will be compatible with these servers (non Server GPU will also work NVIDIA A5000 or A6000 if it is compatible).?

If there are option please  provide us with some options  also recommend what riser we might need etc?

[support_s · Accepted solution]

System recommended content:

1. HPE ProLiant DL380 Gen11 Server Maintenance and Service Guide | Accelerator and GPU options spare parts

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[TQB1]

Hi,

As per the link the GPU supports are 

NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE P48409-001 NVIDIA A100 80GB PCIe Non-CEC Accelerator for HPE P54869-001

HOwever wanted to check will any of these work ?

VCNRTX4500ADA-SB or RTX 4500 >?

[TQB1]

Can you also tell me from where i can source this in Ireland please ?

[Suman_1978]

Hi,

Please refer to the server QuickSpecs on page# 61 for HPE Computation and Graphics Accelerators.

You can contact HPE Ireland sales or Reseller for the parts availability.

Here is the online shop link.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[shuff]

For your HPE ProLiant DL380 Gen11 servers, the following GPUs are compatible: NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE, NVIDIA L4 24GB PCIe Accelerator, NVIDIA L40 48GB PCIe Accelerator, NVIDIA H100 80GB PCIe Accelerator, and Intel Data Center GPU Max 1100. For non-server GPUs, the NVIDIA A5000 or A6000 are not specifically mentioned as compatible in the provided contexts. For the riser, you can use the HPE DL38X Gen10 Plus x16/x16 Slot 1/2 FIO Riser Kit or the HPE DL38X Gen10 Plus x16/x16 Slot 2/3 FIO Riser Kit. Please note that these riser kits do not support the A100 GPU card.

For the A100 GPU card in the HPE ProLiant DL380 Gen11 servers, you should use the HPE DL385 Gen10 Plus Primary/Secondary Riser Cage without Retainer Clip (P38771-B21) or the HPE DL385 Gen10 Plus Tertiary Riser Cage without Retainer Clip (P38774-B21). These risers are required when an A100 GPU card is selected.