HPE Community
HPE EVA Storage
1758801 Members
2766 Online
108875 Solutions
New Discussion

How can i do 2 server via Hub2/3 on MSA1000

 
Piriya Deachana
New Member

‎06-26-2005 03:19 AM

‎06-26-2005 03:19 AM

How can i do 2 server via Hub2/3 on MSA1000

Hi
I try to config DAS via Hub2/3 on MSA1000. I had create 2 logical and assign each of logical to each server by config SSP already. but when both of server start. One server can access to logical normally. but another can not see anything in Disk Management.

PS. Both server run Windows2003 SE
0 Kudos
Reply
1 REPLY 1
Jefferson Humber
Honored Contributor

‎06-26-2005 03:32 AM

‎06-26-2005 03:32 AM

Re: How can i do 2 server via Hub2/3 on MSA1000

Piriya,

Are yoy saying you want each server to be able to see one LUN each, or both ? Both would not be reccomended of course.

Are the connection profiles setup as 'Windows' for both servers ?

What does 'SHOW ACL' & 'SHOW CONNECTIONS' say from the CLI ?
I like a clean bowl & Never go with the zero
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.