HP StorageWorks 4/8 SAN Switch

[lucheman]

I am trying to login to an HP StorageWorks 4/8 SAN Switch using the serial port. The person that installed the switch said that he did not change the default password. However, I cannot login with the username: admin and the password: password which I thought was supposed to be the default username/password? It tells me incorrect login. Does this mean incorrect username or incorrect password? Does anybody know what the default username and password should be on this particular switch?

Thanks.

[Rob Leadbeater]

Hi,

The default username/password is admin/password

If that fails then you could try root/password

Hope this helps,

Regards,

Rob

[Ivan Ferreira]

You are trying with the correct account, admin/password. If you cannot login, then someone changed the default password.

As said above, you could try with root also.

[lucheman]

I figured out the ip and the password after trying everything possible.