HPE Community
IP Telephony - NBX
1754926 Members
3148 Online
108827 Solutions
New Discussion

NBX 100 - Time Displayed on Telephone Device

 
biju_1
Occasional Contributor

‎04-05-2009 03:38 AM

‎04-05-2009 03:38 AM

NBX 100 - Time Displayed on Telephone Device

Hi,



We have two LAN, one with XXX.XXX.1.XXX and the other with XXX.XXX.30.XXX. The NBX 100 box is in the 1st network. Phones are working perfectly from both the network, but the time displayed on the second network is not correct. How can I fix this issue?



Thanks

0 Kudos
1 REPLY 1
bosoxfan_1
Super Advisor

‎04-06-2009 07:18 AM

‎04-06-2009 07:18 AM

Re: NBX 100 - Time Displayed on Telephone Device

The NBX updates the time on the phones by sending a multicast packets... Sounds like your router is not allowing multicast between the two subnets.. fix this and the phones on the .30 subnet will get the correct time.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.