Switch HP V1910-24G JE006A - Program does not exist!

[AudreyKingston]

Hello people. I was trying to reset my HP V1910-24G JE006A Switch, and by mistake, I ended up pressing Ctrl + F Format File System.

Now I'm unable to access it via the web or access the CLI, to restore it to the factory default. Only the message appears: Application does not exist.
I have already imported several images via Serial / XMODEM, however, the switch does not apply these images. Some help?

[drk787]

Hi @AudreyKingston 

What exactly happens when you try to load the new image via serial console. Below if the link to download the switch software. If you remember the version which was running earlier, you may try downloading the same version and restore the software (.bin file) through serial console. Alternatively you can try loading the software through TFTP from the bootrom mode. You may follow the TFTP procedure from the release notes on page 59 (Release notes: https://support.hpe.com/hpesc/public/docDisplay?docId=a00069965en_us)

Software download link for JE006A: 

https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=JE006A