MSA 2050 not syncing between 2 servers

[MarkPV]

Hi, I'm in bit of a struggle with I think some faulty settings, maybe anyone knows the clue... 

- MSA2050, updated it to newest firmware
- 2 x DL360 gen10 with newest firmware, connected with H241 controller, running HyperV 2019.

Volumes created, initiators created, machines see the volumes, all looks good, however:
Creating a file on server 1, will not show in same map on server 2. Waited 30 min withou succes.
After reboot, server 2 does see the file created on server 1, however, editing this file will again not sync to the other server.

H241's does say they don't see drives, but are configured into HBA modus. 
Failover cluster says it does not detect drives to create cluster shared volume. 

Thanks in advance...

Kind regards,

Mark

[MarkPV · Accepted solution]

Turned out to be an additional needed windows driver for the H241 controller... can be closed!

[Sunitha_Mod]

Hello @MarkPV,

Great! 

We are glad to know you were able to find the solution and we appreciate you for keeping us posted.