LPr and LP1000r's using RILO?

[Tim Wescott_3]

Hello

Does anyone know if it's possible to fit RILO cards to NetServers LPr and LP1000r? If so, is there a specific model to use?

If not, are there alternatives that give a similar level of support?


Thanks
Tim

[kris rombauts · Accepted solution]

Tim,

no RILOE-II is only compatible with these Netservers :

HP Netserver LC 2000
HP Netserver LH 3000/3000r
HP Tower Server TC3100
HP Tower Server TC4100

For the LP1000r and LPr you can use the TTRC (TopTools Remote Control Card) which is a obsolete product by now but maybe you can still find some on the internet.

By default those LP1000r and LPr have a
serial management port build in that has some capabilities but nothing LAN based like Ilo.


HTH

Kris

[Terri Harris]

Kris is exactly right. I just wanted to add that the TopTops RCC (Remote Control card) that is compatible with these Netservers is HP part # P1218A (Remote Control Card 2.0). Documentation is available here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=62319

RCC 2.0 Specifications:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=thp00150&locale=en_US&taskId=101&prodSeriesId=62319&prodTypeId=329290

The RCC 2.0 card is no longer available from HP, but use any Internet search engine and search by the part number, you will find options to buy.