igelan driver for C8000 Driver for

[Ronit_1]

Hi All

Below is my machine description, I want to update recent driver for Ethernet card. Please suggest me the recent driver with patch installed for this card.

I did some investigation and found PHNE_34427 is the latest patch, but could not find recent driver for the same.

Please let me know if i am correct, Waiting for ur reply

regards
Ronit




#root# what /stand/vmunix|grep -i igelan
igelan_ilan Version: 1 Apr 20 2005
igelan Revision: B.11.11.21 Apr 20 2005




uname -a

HP-UX rdc80002 B.11.11 U 9000/785 3730326907 unlimited-user license


# ioscan -fnC lan
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
lan 0 0/0/1/0 igelan CLAIMED INTERFACE HP A6825-60101 PCI 1000Base-T Adapter
lan 1 0/3/3/0 iether CLAIMED INTERFACE HP PCI 1000Base-T Built-in

[Robert-Jan Goossens · Accepted solution]

Hi Ronet,

http://www8.itrc.hp.com/service/patch/patchDetail.do?BC=main|patchDetail{PHNE_34340,{hpux:11.11,}}|&patchid=PHNE_35692&sel={hpux:11.11,}

Patch Description: s700_800 11.11 IGELAN 1000Base-SX/T B.11.11.[02-24] patch

PHNE_34340

Regards,
Robert-Jan

[Eric Jacklin]

Hi

Checked the attach document.It will help you out

Regards
Jits

[Ronit_1]

Thanks, i installed patch but how can i verify that patch is fine, How can i do some testing with this patch, just to make sure everything is okie.

[Ivan Krastev]

Check for new features, available after patch installation.
Check with lanadmin -x card_info 0


regards,
ivan

[Ronit_1]

I got this output, does it means everything is okie ?

Driver version: B.11.11.25
Firmware version: 1.0.5/1.10
Chip version: 0x15
PCI Sub-System ID: 0x128a (1000Base-T)
PCI Sub-Vendor ID: 0x103c
Board Revision: A3
Software Key: 0
Engineering Date Code: B-4246

********** Card Setting ***********
Driver State: IGELAN_ONLINE
Auto Negotiation: On
Flow Control: On
Send Max Buf Descriptors: 10
Recv Max Buf Descriptors: 1
Send Coalesced Ticks: 150
Recv Coalesced Ticks: 0

[Ivan Krastev]

'Engineering Date Code: B-4246' means that everything is OK. New features are available and diver is in use.


regards,
ivan

[Ronit_1]

Thanks a lot, just for info, how can i find list of Engineering code return by landadmin.

Let say if something is wrong, what engineering code will be return

[Ivan Krastev]

If something is wrong you will have UNCLAIMED or NO_HW igelan device listed.

Listing that engineering code only confirms that new driver is installed and its in use.


regards,
ivan

[Ronit_1]

Thanks again, can i get some doc in hp site for this.