Missing something installing MC/Serviceguard

[Greg OBarr]

I'm trying to install MC/Serviceguard on an L2000 running HP-UX 11.00. The SG package fails analysis, saying that some required package files are not there. Partial message:

items which could not be found in the source. However, these items ^ x x
may already be in the target. This will be checked during the x x
Analysis Phase: x x
Cluster-OM.CM-OM,r>=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-OM-AUTH,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP xqx
Cluster-OM.CM-OM-TOOLS,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP xdx
Cluster-OM.CM-OM-MAN,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP xqx
Cluster-OM.CM-DEN-PROV,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-DEN-MOF,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-OM,r>=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-OM-AUTH,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-OM-TOOLS,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-OM-MAN,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-DEN-PROV,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
Cluster-OM.CM-DEN-MOF,r=A.01.01,a=HP-UX_B.11.00_32/64,v=HP x x
The software "Package-Manager,r=A.11.12,a=HP-UX_B.11.00_32/64,v=HP" x x
was successfully marked, but it depends on the following software v x x

Anyone know what this is?

[Pedro Sousa · Accepted solution]

Hi Greg!
Here's a good thread about this:
http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x987937f45ef7d4118fef0090279cd0f9,00.html

good luck.

[Greg OBarr]

Thanks Pedro! That's EXACTLY what I needed!

-greg