swinstall multiple bundle HWE1100 and QPK1100

[Steve_3]

I have the support plus cd and is possible to install both HWE1100 and QPK1100 at the same time with swinstall so there is only one reboot.

thanks,
steve

[Jeff Schussele]

Yes, you should be able to.
Bring up swinstall in interactive mode by issuing the swinstall command w/o any params. Is best to run GUI so make sure your DISPLAY variable is set correctly.
Then point source to local CD. Then mark for install both of these & run thru analysis.

Rgds,
Jeff

[Francois Bariselle_3]

Hi,

Humm, I think that isn't a good idea.

After the first bundle, the kernel would be compiled before installing the second.

Check this.

Frank

[S.K. Chan]

I would install HWE1100 first since this bundle is more critical, let it reboot and then install QPK1100, which are just a bunch of updated patches with new fixes.

[Francois Bariselle_3]

Excuse me john for my previous post,

See :

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xa8b2ba808b46d611abda0090277a778c,00.html

You can select the individual bundles with swinstall (interactive method).

Frank.