Optical Jukeboxes and Drives
1754371 Members
3207 Online
108813 Solutions
New Discussion юеВ

HP CDW 8200 with record now ejects blank cds

 
SOLVED
Go to solution
Reuben_6
New Member

HP CDW 8200 with record now ejects blank cds

Specs
- external HP CDW+ 8200f (USB)
- IBM thinkpad a21e
- Win 2k
- HP Record Now 3.5

I can make data disks with Adaptec wizard, no worries. But i am limited to 650meg, even on 700meg disks.

So i installed most recent RecordNow, but it ejects my blank CD's. it won't recognise them even tho they are good (same machine, same boot, using adaptec)

Also, i havn't been able to use nero or real jukebox etc, because they won't detect my cd writer, even from a cold boot.

Please solve any of the above problems. I just want to record ISO images, music disks and access all 700 megs of data cds.

Thanks
Reuben

 

 

P.S. This thread has been moevd from Disk to Optical Jukeboxes & Drives. - Hp forum Moderator

4 REPLIES 4
Lance Brown
Esteemed Contributor

Re: HP CDW 8200 with record now ejects blank cds

What Adaptec software are you running? I have used Roxio Easy CD Creator 5 and it can handle 700MB discs. Adaptec spun off the software division and the new name is Roxio.

Lance
Trent_5
New Member
Solution

Re: HP CDW 8200 with record now ejects blank cds

Hi Reuben, had the same problem using Nero but found this post on the board which fixed it right up:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x73144b3ef09fd611abdb0090277a778c,00.html

The link to the file in question is broken however, but I found the same file at the following link:

http://www.peregrine.com.my/tech.cfm

I just grabbed the file, replaced the WINASPI32.DLL that resides in the Nero directory with this one, and voila, burner was detected.

On a side note, I did find a new problem. My CD would burn to 100% and then fail with a "Scsi Target Error".... Grr.

Anyways, hope this helps.

Trent

Reuben_6
New Member

Re: HP CDW 8200 with record now ejects blank cds

Lance,
Adaptec Direct CD Wizard 3.05

Trent,
Thanks it worked.

HP,
I'm was hoping to use your software with your hardware, with help from your forum??? Glad the forum works!
Lance Brown
Esteemed Contributor

Re: HP CDW 8200 with record now ejects blank cds

You might think about a quick Adaptec/Roxio upgrade. You can upgrade from 3.0 or later to 3.5C at this page:
http://www.roxio.com/en/support/roxio_support/ecdc/ecdc_software_updatesv3.jhtml
It???s free and supports newer drives. Every version that Roxio brings out is usually better then the previous.

Lance