ML350 G6 P410i/ZM and 250GB SATA disks

[Johann Villalba_1]

i have one server and want to reuse some 250GB SATA/150 disk from a MSA1500 cage...

i can create de Array in RAID1+0 with no problem, but when I try to install Windows 2003 Server R2 and format the disk fail

the part number of the disk are: 356536-003

Some advice?

[radek zima_1]

Hi Johann, older 3,5" drives (like this SATA generation 1 with 250GB at 1.5Gb from MSA20 - that's the enclosure you connected to your MSA1500) are not supported on P410 ... not sure about reason (the drive probably does not support all non-mandatory commands the controller is using?) ... actually there is only one SATA Generation 1 drive supported on new controllers that came with G6, that's the old 160GB drive used mainly on ML100 series ... Radek