HPE Community
BladeSystem - General
1755615 Members
4034 Online
108836 Solutions
New Discussion

Who Me Too'd this topic

Mel Nugent
Regular Advisor

‎06-26-2012 04:52 AM

‎06-26-2012 04:52 AM

Adding BL460c G7 to C7000 chassis (esxi4.1)

I have a c7000 chassis with 4x BL680c G5 blades and 1x BL460c G6 running ESXi 4.1. The chassis also has a BL860c running VMS. There are 2x Cisco MDS 9124eand 4x Cisco Catalyst Blade Switch 3020.

 

I want to add a new BL460c G7 to the chassis and install ESXi 4.1 and add to the exising vmware cluster. Will I have to update the OA before I add the new blade and is there any paticular order to update the firmwares in.

 

OA firmware is current 3.21

BL680c are on I17 03/02/2010   (think 2011.05.02 is latest)

BL460c G6 is on I24 09/02/2010   (think 2011.05.05 is latest)

Not sure on BL860c rom version

 

Thanks

1 person had this problem.
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.